|
||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||
| WOLVERINE
|
|
|
Wolverine-3:
57 grains, 1 1/4" cutting diameter, with three 0.027" thick blades. Perhaps
the lightest head to ever take a buffalo in a single shot, the Wolverine-3
is the lightest, fastest, and grain-for-grain toughest hunting arrowhead
ever made. Perfect for the speed shooter interested in the flattest
trajectory, the Wolverine-3 also works equally well with low poundage bows.
The shortness of the blades, and their angle out from the body when closed,
make for a quick opening at lower speed.
|
 |
Wolverine-4:
60 grains, 1 1/4" cutting diameter, with four 0.027" thick blades. The
Wolverine-4 is the lightest and fastest four-blade hunting arrowhead made.
It has the same construction as the Wolverine-3. The blades and chisel tip
are interchangeable with those used on the Wolverine-3. For use with all
bows, from the fastest speed bows to lower poundage bows.
|
 |
Wolverine-3P:
75 grains, 1 1/4" cutting diameter, with three 0.027" thick blades. The
Wolverine-3P is the Wolverine-3 with our new Pathfinder point leading the
cut. The deep-concave cut of the Pathfinder concentrates a lot of
bone-shattering force on a small surface area, while its extra wide cut
means less shaft resistance and deeper, deadlier penetration. For use with
any bow.
|
 |
Wolverine-4P:
78 grains, 1 1/4" cutting diameter, with four 0.027" blades. The
Wolverine-4P is the Wolverine-4 with the Pathfinder tip added. The
Pathfinder tip dramatically increases the penetration of the Wolverine on
larger diameter aluminum shafts. The blades angle out from the body for
quick opening
|
| MINIBLASTER
|
|
 |
Miniblaster-3:
75 grains, 1 3/4" cutting diameter, with three 0.027" thick blades. The
Miniblaster-3 is a small bundle of dynamite, packing a huge cutting diameter
in a light weight head. It is designed for uncompromised field point
accuracy at high velocity, where the blades literally snap open on contact.
It is recommended for launch speeds of 280 ft/sec or greater, at which speed
the blades will leave a full-width entry wound on fur of the same thickness
as that of a whitetail deer.
|
 |
Miniblaster-3L:
76 grains, a 1 3/4" cutting diameter, and three 0.030" thick blades. The
same body as the Miniblaster-3 but the blades have large extended tips for
quick opening at lower speeds. The "L" shaped blades provide several times
more blade-opening leverage on impact (relative to the straight Miniblaster
blades) to ensure a full width open-blade entry wound at lower speeds.
Recommended launch speed is 220 ft/sec or greater.
|
 |
Miniblaster-3XL:
77 grains, 1 3/4" cutting diameter, with three 0.030" blades. The same body
as the Miniblaster-3 but the blades have extra large (XL) extended blade
tips for maximum blade opening leverage. The blades will open externally on
a tomato. The extra large blade prongs provide a leverage point further away
from the center axis, limiting the amount of energy used to open the blades
at low speeds to the small amount needed to expand the O-ring. Recommended
for speeds under 220 ft/sec.
|
 |
Miniblaster-4:
Four 0.027" blades, 78 grains, and 1 3/4" cutting diameter. The
Miniblaster-4 was made to take full advantage of the energy of today's high
speed arrows. It is made with the same threaded steel chisel tip and solid
blades as the three blade version, and it's just as tough. A launch speed of
280 ft/sec or greater is recommended to ensure external blade deployment and
optimum penetration.
|
 |
Miniblaster-4L:
Four 0.030" thick blades, 79 grains, 1 3/4" cutting diameter, and 1/2" in
flight. The same body as the Miniblaster-4 but the blades have large
extended blade tips for greater blade-opening leverage on impact. The
exposed tips have no noticeable effect on flight (1/2" drop at 60 yards with
a bow machine) because of their small surface area. Recommend for speeds
upwards of 220 ft/sec.
|
|
|
|
